HaphazardTech

Category: Props

  • Princess Sorsha Sword

    —

    by

    jimel
    in ,

    6mm EVA Foam, TNT Cosplay Supply C4 Foam Clay, TNT Cosplay Supply 3/8″ Metal Rod Black Leather Barge TF Contact Cement Sorsha’s Sword Post-paint photo. The Finished Sword

  • General Kael Sword

    —

    by

    jimel
    in ,

    Multiple Thicknesses of EVA-38 Foam (TNT)Steel Rod, 3/8″Barge TF Contact CementBlack Leather Sword Core The blade is made from two long strips of 6mm EVA Foam (TNT). The core of the sword is a 3/8″ steel rod. The first step was to cut 2 pieces of 6mm foam to the rough width of the blade…

  • Stargate Zat’Nik’Tel

    —

    by

    jimel
    in

    I spent a long time watching the Quantum Mechanix video featuring the never-to-be-released working Zat’Nik’Tel and I’ve been dreaming up building my own functioning version ever since. This is a work in progress. I printed most of the pieces hollow to fit electronics and a battery pack. I’m not sure if it’s doable with this…

  • Stargate Mk2 with DHD

    —

    by

    jimel
    in , ,

    I started building a Working Stargate Mk2 with Working DHD and SFX, designed by Glitch. I’m slowly working my way through the Arduino and stepper motor configuration. The documentation for this project is not spectacular, but the framework is there and it was a fun puzzle to figure out. It’s definitely not perfect, but still…

  • Halo M6D Magnum

    —

    by

    jimel
    in ,

    I got an opportunity to participate in the Punished Props Secret Santa Exchange for the first time in 2019, and I put together a 3D printed M6G Magnum from Halo. It featured a working slide and trigger, as well as a removable clip. It was a great pleasure to join in on the prop making…

  • Stargate Horus Head

    —

    by

    jimel
    in ,

    The Horus headpiece was Tom’s masterwork. The pepakura model was covered in several layers of paper mache, following by many, many… uh, many… coats of Bondo. The result was a beautiful piece of art. Unfortunately, the Bondo made it fairly heavy we had to come up with a mounting solution. We used a large cell…

  • General Kael

    —

    by

    jimel
    in , ,

    Helmet: EVA Foam, Foam Clay, Styrene, LeatherChest Armor: EVA Foam, Leather, BucklesCape: FleeceSword: EVA Foam with a 3/8″ Metal Core, Leather General Kael’s Helmet & Facemask EVA Foam – 4mm & 6mm, TNT Cosplay SupplyFoam Clay – C4 Foam Clay, TNT Cosplay SupplyStyrene Plastic Sheet – TNT Cosplay SupplyAluminum Chainmail Coif – Split for Kael’s…

  • Queen Bavmorda

    —

    by

    jimel
    in ,

    Crown Materials: Worbla Finest Art, EVA Foam, Steel D-Rings, Nylon Webbing, Black LinenRobe Materials: Linen Cloth Building Bavmorda’s Crown This was my first time using Worbla. It’s incredibly expense to buy in the US, so it’s hard to justify the spend. However, I have a few sample packs I purchased of the different versions of the…

  • Princess Sorsha Helmet

    —

    by

    jimel
    in ,

    6mm EVA Foam, TNT Cosplay Supply C4 Foam Clay, TNT Cosplay Supply Black Leather Styrene Plastic Sheets Aluminum Chainmail Half-Round Pearl Beads Barge TF Contact Cement Pattern Base: Evil Ted’s Samurai Helmet (top section only)Freehanded Parts Sorsha’s Helmet Helmet Materials: EVA Foam, Foam Clay, Styrene, LeatherSword Materials: EVA Foam with a 3/8″ Metal Core, Leather…

  • Willow (1984) Group Cosplay

    —

    by

    jimel
    in ,