Category: Cosplay

  • Princess Sorsha Sword

    6mm EVA Foam, TNT Cosplay Supply C4 Foam Clay, TNT Cosplay Supply 3/8″ Metal Rod Black Leather Barge TF Contact Cement Sorsha’s Sword Post-paint photo. The Finished Sword

  • General Kael Sword

    Multiple Thicknesses of EVA-38 Foam (TNT)Steel Rod, 3/8″Barge TF Contact CementBlack Leather Sword Core The blade is made from two long strips of 6mm EVA Foam (TNT). The core of the sword is a 3/8″ steel rod. The first step was to cut 2 pieces of 6mm foam to the rough width of the blade…

  • General Kael Armor

    General Kael’s armor in the movie is leather with metal shoulders, shin guards, and a gauntlet cover on his sword hand. Front Chest Plate – 6mm EVA-50 High Density Foam, TNT Cosplay Supply Chest Armor – 6mm EVA-38 Foam, TNT Cosplay Supply Back Armor – 10mm EVA-38 Foam, TNT Cosplay Supply Chest Armor Scales –…

  • General Kael Helmet

    EVA Foam – 4mm & 6mm, TNT Cosplay SupplyFoam Clay – C4 Foam Clay, TNT Cosplay SupplyStyrene Plastic Sheet – TNT Cosplay SupplyAluminum Chainmail Coif (Split into 2 pieces for Kael’s Helmet and Sorsha’s Chainmail Collar)Faux Fur – Part of my winter coat that I didn’t need. It was removable.Leather, Gun Metal Colored Rivets, Stainless…

  • Stargate Horus Head

    The Horus headpiece was Tom’s masterwork. The pepakura model was covered in several layers of paper mache, following by many, many… uh, many… coats of Bondo. The result was a beautiful piece of art. Unfortunately, the Bondo made it fairly heavy we had to come up with a mounting solution. We used a large cell…

  • General Kael

    Helmet: EVA Foam, Foam Clay, Styrene, LeatherChest Armor: EVA Foam, Leather, BucklesCape: FleeceSword: EVA Foam with a 3/8″ Metal Core, Leather General Kael’s Helmet & Facemask EVA Foam – 4mm & 6mm, TNT Cosplay SupplyFoam Clay – C4 Foam Clay, TNT Cosplay SupplyStyrene Plastic Sheet – TNT Cosplay SupplyAluminum Chainmail Coif – Split for Kael’s…

  • Queen Bavmorda

    Crown Materials: Worbla Finest Art, EVA Foam, Steel D-Rings, Nylon Webbing, Black LinenRobe Materials: Linen Cloth Building Bavmorda’s Crown This was my first time using Worbla. It’s incredibly expense to buy in the US, so it’s hard to justify the spend. However, I have a few sample packs I purchased of the different versions of the…

  • Princess Sorsha Helmet

    6mm EVA Foam, TNT Cosplay Supply C4 Foam Clay, TNT Cosplay Supply Black Leather Styrene Plastic Sheets Aluminum Chainmail Half-Round Pearl Beads Barge TF Contact Cement Pattern Base: Evil Ted’s Samurai Helmet (top section only)Freehanded Parts Sorsha’s Helmet Helmet Materials: EVA Foam, Foam Clay, Styrene, LeatherSword Materials: EVA Foam with a 3/8″ Metal Core, Leather…

  • Klingon Baldric

    This is a replica of Worf’s Baldric from Star Trek: The Next Generation. I found some information on building this baldric on YouTube. I had been researching the project for quite a while. I was able to source the proper parts to make it. Materials: Aluminum Rings, Square Saddle Rings, Leather Sources: – Aluminum Spacers: AluminumSpacers.com –…